WPC balcony tiles from FINECOVER

Is there anything better than a well-kept terrace or a well-kept balcony area?

You want to make this as appealing as possible and in style, so that you feel comfortable.

Can WPC replace wood?

The choice for the appropriate floor panels is difficult. No wonder, as it can only be partially protected from the weather conditions. In summer, it is the direct sun or UV radiation, while in the fall / winter wet weather causes problems or even snow on the plates. Is there any material for the ground that can withstand all these conditions?

WPC composite of the future

"Wood-Plastic Composites", WPC for short, is a mixture of about 65% wood and 35% plastic. The plastic is incorporated into the wood. This workmanship makes the WPC planks perfect for outdoor use. The material is hardly distinguishable from wood, but is easier to care for, longer lasting, safer and available in 5 colors.

Easy care and cleaning

WPC click tiles are suitable for everyone. Even after ten years you do not see the WPC floor that it has been there for so long. Unlike wood, WPC is very easy to care for. It is sufficient to sweep this regularly or rinse with warm water. Greater soiling can easily be wiped off without the soil absorbing the moisture. This can not swell the material.

WPC Finecover is dimensionally stable and moisture resistant. It has some advantageous features, such as the storage of heat, the longevity of the panels and the ease of laying through the click system. In addition, the feeling of running over the WPC plates is very pleasant, without catching splinters.

Of course the WPC balcony tiles are constantly being developed. So our WPC tiles are surrounded by a special protective mantle that makes our floor tiles even more stain resistant and scratch resistant than other products. Also, they are insensitive to UV radiation and the mold has even fewer opportunities. Conventional plates with inferior protective casing of wood flour can lead to problems. These are more vulnerable, absorb moisture, rot, become brittle, or cause color changes. For this reason, we dispense with our floor slabs on a coating of wood flour.

WPC is less break-resistant than wooden planks, but this is compensated by special profiles and higher material thicknesses. We only use solid profiles because they do not disintegrate like the hollow profiles, but are rot-proof and because the solid profiles do not provide a support surface for the water and moisture inside. WPC plates are not completely degradable due to the plastic content.

Advantages of WPC at a glance:

• easy to clean and low maintenance

long durability

• looks natural and looks almost like real wood

• Insensitive to salt water and chlorine

• Mushrooms, algae or UV rays do not affect the material

• color-fast appearance, even after a few years no discoloration

How do I install the Finecover WPC click tile?

The following instructions make it easier for you to lay your balcony tiles effortlessly and simply. Thanks to our simple plug-in system, this covering variant can easily be dismantled and dismantled again. Therefore, our click tiles are perfect for rental housing trade show booths etc. Our WPC click tiles offer you a cheap and noble alternative to make their existing floor of the terrace or their balcony so that they can relax as on vacation. In addition, we offer our WPC tiles in 5 different colors, so that there is something for every taste.

With a small amount of time they assemble their WPC balcony slabs.

Our instructions will tell you how you can enjoy your terrace quickly and easily in a few hours.

1. Existing floor / surface cleaning (if necessary)

Before you can start laying the tiles, the existing floor should be wiped clean, free of small stones and weeds.

2. Spread the fleece on a dry floor

If you have used water to clean your floor or if it should be wet, allow the area to dry for the time being. Then lay the fleece on the floor and make sure that the fleece stripes overlap 10 cm.

Tip: We recommend a sharp cutter to adjust the fleece

3. Lay WPC click tiles

Now you can start laying the click tiles. The tiles are laid from right to left. Row by row, insert the click tiles from right to left. As soon as they arrive at the end of the left side and the last tile is still a little too long, they can effortlessly shorten it with a jigsaw.

Tip: If you have unsightly or sharp edges on the sections, it makes sense to smooth them with sandpaper.